- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
The Precision Vertical Center for Mold Making sets the industry standard for high-accuracy machining of complex molds and dies.
| Quantity: | |
|---|---|
Designed with a focus on surface finish and dimensional precision, this vertical machining center combines advanced spindle technology with rigid construction to meet the exacting requirements of mold manufacturing. Its hybrid structure — merging cast iron stability with linear guideway responsiveness — delivers the perfect balance between vibration damping and dynamic performance, making it ideal for both hardened steel machining and intricate cavity creation.
At its core is a 20,000 RPM CAT 40-taper spindle with core cooling and under-race lubrication, minimizing thermal distortion during extended machining cycles . Optional 30,000 RPM HSK-F63 spindles provide superior surface finishes (Ra ≤ 0.4 μm) for cosmetic mold components.
Featuring CELOS X software with proprietary SGI.5 servo technology, the machine reduces cycle times by up to 40% compared to conventional controls when machining complex 3D contours . The 21.5” touchscreen interface simplifies programming of mold cavities and cores.
Active temperature control systems — including twin-shield splash guards and coolant temperature regulation — maintain consistent machine geometry, ensuring ±0.001 mm accuracy even in uncontrolled shop environments.
Parameter | Specification |
X/Y/Z Axis Travel | 60.6 in / 29.9 in / 26 in |
Maximum Workpiece Weight | 4,409 lbs |
Spindle Speed | 20,000 RPM (standard) |
Positioning Accuracy | ±0.0002 in |
Surface Finish Capability | Ra ≤ 0.4 μm |
Tool Magazine Capacity | 24 tools (expandable to 40) |
Producing precision cavities for automotive interior components, where the machine’s micro-machining capabilities handle intricate textures and draft angles with exceptional repeatability.
Machining hot runner systems and cooling channels in H13 tool steel hardened to 50-55 HRC, eliminating the need for post-machining EDM operations.
Creating composite layup molds and inspection fixtures, leveraging the 5-axis capability for complex 3D surfaces on titanium and Inconel workpieces.
The rigid spindle design and high-torque output (161 ft-lbs) enable direct cutting of materials up to 55 HRC without performance degradation .
Specialized high-feed endmill cycles and spindle vibration monitoring maintain consistent chip loads, while coolant-through spindles (300 PSI) prevent heat-induced surface defects.
Yes, the machine accommodates workpieces up to 66.9 in in length, making it suitable for automotive bumper molds and large appliance panels .
Designed with a focus on surface finish and dimensional precision, this vertical machining center combines advanced spindle technology with rigid construction to meet the exacting requirements of mold manufacturing. Its hybrid structure — merging cast iron stability with linear guideway responsiveness — delivers the perfect balance between vibration damping and dynamic performance, making it ideal for both hardened steel machining and intricate cavity creation.
At its core is a 20,000 RPM CAT 40-taper spindle with core cooling and under-race lubrication, minimizing thermal distortion during extended machining cycles . Optional 30,000 RPM HSK-F63 spindles provide superior surface finishes (Ra ≤ 0.4 μm) for cosmetic mold components.
Featuring CELOS X software with proprietary SGI.5 servo technology, the machine reduces cycle times by up to 40% compared to conventional controls when machining complex 3D contours . The 21.5” touchscreen interface simplifies programming of mold cavities and cores.
Active temperature control systems — including twin-shield splash guards and coolant temperature regulation — maintain consistent machine geometry, ensuring ±0.001 mm accuracy even in uncontrolled shop environments.
Parameter | Specification |
X/Y/Z Axis Travel | 60.6 in / 29.9 in / 26 in |
Maximum Workpiece Weight | 4,409 lbs |
Spindle Speed | 20,000 RPM (standard) |
Positioning Accuracy | ±0.0002 in |
Surface Finish Capability | Ra ≤ 0.4 μm |
Tool Magazine Capacity | 24 tools (expandable to 40) |
Producing precision cavities for automotive interior components, where the machine’s micro-machining capabilities handle intricate textures and draft angles with exceptional repeatability.
Machining hot runner systems and cooling channels in H13 tool steel hardened to 50-55 HRC, eliminating the need for post-machining EDM operations.
Creating composite layup molds and inspection fixtures, leveraging the 5-axis capability for complex 3D surfaces on titanium and Inconel workpieces.
The rigid spindle design and high-torque output (161 ft-lbs) enable direct cutting of materials up to 55 HRC without performance degradation .
Specialized high-feed endmill cycles and spindle vibration monitoring maintain consistent chip loads, while coolant-through spindles (300 PSI) prevent heat-induced surface defects.
Yes, the machine accommodates workpieces up to 66.9 in in length, making it suitable for automotive bumper molds and large appliance panels .
