The high-strength welded bed is in a split inverted T-shaped structure. The other large foundation pieces are made of high-quality resin sand molding and high-strength cast iron. The main castings are all subjectto finite element analysis, and the rib grid layout is optimized to fully meet the needs of high toraue cutting ofthe machine tool.
| Quantity: | |
|---|---|
TZ-HMC80
TAIZ
TZ-001
Designed with a focus on surface finish and dimensional precision, this vertical machining center combines advanced spindle technology with rigid construction to meet the exacting requirements of mold manufacturing. Its hybrid structure — merging cast iron stability with linear guideway responsiveness — delivers the perfect balance between vibration damping and dynamic performance, making it ideal for both hardened steel machining and intricate cavity creation.
At its core is a 20,000 RPM CAT 40-taper spindle with core cooling and under-race lubrication, minimizing thermal distortion during extended machining cycles . Optional 30,000 RPM HSK-F63 spindles provide superior surface finishes (Ra ≤ 0.4 μm) for cosmetic mold components.
Featuring CELOS X software with proprietary SGI.5 servo technology, the machine reduces cycle times by up to 40% compared to conventional controls when machining complex 3D contours . The 21.5” touchscreen interface simplifies programming of mold cavities and cores.
Active temperature control systems — including twin-shield splash guards and coolant temperature regulation — maintain consistent machine geometry, ensuring ±0.001 mm accuracy even in uncontrolled shop environments.
Parameter | Specification |
X/Y/Z Axis Travel | 60.6 in / 29.9 in / 26 in |
Maximum Workpiece Weight | 4,409 lbs |
Spindle Speed | 20,000 RPM (standard) |
Positioning Accuracy | ±0.0002 in |
Surface Finish Capability | Ra ≤ 0.4 μm |
Tool Magazine Capacity | 24 tools (expandable to 40) |
Producing precision cavities for automotive interior components, where the machine’s micro-machining capabilities handle intricate textures and draft angles with exceptional repeatability.
Machining hot runner systems and cooling channels in H13 tool steel hardened to 50-55 HRC, eliminating the need for post-machining EDM operations.
Creating composite layup molds and inspection fixtures, leveraging the 5-axis capability for complex 3D surfaces on titanium and Inconel workpieces.
The rigid spindle design and high-torque output (161 ft-lbs) enable direct cutting of materials up to 55 HRC without performance degradation .
Specialized high-feed endmill cycles and spindle vibration monitoring maintain consistent chip loads, while coolant-through spindles (300 PSI) prevent heat-induced surface defects.
Yes, the machine accommodates workpieces up to 66.9 in in length, making it suitable for automotive bumper molds and large appliance panels .
